RT0701C 1-1/4 HP Compact Router

At 30 I've only recently discovered the existence of the amazing tool that is the wood router. I'm a musician that has recently got into customizing/upgrading my own guitars, and watched luthiers on youtube build their own instruments out of a router. I'm also a DIY'er in general around the house. And finding out about the router was like pandoras box of creation for me! Last month I bought a Dremel 4300 which I partly bought for doing some light routing. I gave it the task of making some custom drawer/cabinet faces for my bathroom. Well, the Dremel was not up to the task (it sucks for any serious routing). So I decided I was gonna bite the bullet and buy a proper wood router. I educated myself on this tool, and decided that I wanted to get a combination fixed base/plunge router. I went to every avenue and excessively researched these things for the best bang for my buck. Home Depot, Lowes, Harbor Freight, eBay, and here, comparing models. I was shocked to see the brick and mortar stores (especially HD and Lowes) have a pretty limited selection of wood routers and accessories. The cheapest in-store deal I could find was Lowes Dewalt combination fixed and plunge base router at $200, not including tax. That was a little too high of a price of an entry point for me. Then I ran across this Makita. I love Makita products. The price almost sounded too good to be true for a combination fixed base/plunge router. I ordered it. I quickly learned how to use setup the tool and I absolutely love it! I made my first cut doing some trim on scrap wood and was blown away. This thing is a wood-cutting beast. Using some cheap project lumbar from HD, I started crafting my own bathroom cabinetry. This thing just effortlessly cuts through wood. It's very easy to control, it doesn't violently start up (which I heard some are bad for). I love that it has a speed control. I leave it on the highest setting (which I heard is best to do), but the fact that it even has that is pretty awesome for the price. And my first set of router bits, I bought a nice kit in Harbor Freight (with coupon) for $30 bucks. They work exceptionally well with this Makita. I used for the plunge attachment and fixed based for doing trim. Honestly, I just love this thing, it's my new favorite tool! It's so fun and amazing the stuff you can make with this. It just takes a little patience and creativity. The tool came with a straight-edge guide for the fixed base which I found kinda useless. Some of the pictures of it in-action show a straight edge guide for the plunge base. I wish it came with this, but it's hard for me to balk for the price. The last thing, it would have been nice if it came with a case like other Makita products, too, but that's also not something to balk at. This is a great tool. I think it's an excellent buy for both entry-level woodworkers like me and more experienced users. And I see it being something that could actually save you money over time if you're into home remodeling as well. I'm definitely going to be using this to craft my own trim, railings, doors, and other things around the house. Highly recommend this router, definitely one of the coolest tools I've bought in my adult life!

Great router, greater set. After a lot of hemming and hawing I sprang for this one because of the capabilities of the set. I could have bought the tilting base separately, and that's what I really needed (trimming angled boxes with a compression bit), but I wanted both plunge base (for drilling shelf holes) and the standard base (for ease of adjustment). I would have preferred the battery powered version but the set was for the corded and enough was enough. It is solid, easy to adjust and to change bits, and with three bases is very flexible. I just got done making a complex curved molding, using a combo of various round over and straight and core box bits with the angle function. My very simple jig is pictured below— I'll make a better one eventually, maybe, once I have figured out what features I really use. Someone complained about the difficulty adjusting the tilting base accurately. I worked off the angle scale (calibrated in 5° increments) and the depth scale, embossed in inches and metric. No problems here.

Ive been a wood worker for about 15 years. I chose this router after researching and using various other brands of routers. I went with the makita kit because it came with more bases then the other kits i was looking at and it fit within my budget.the router is great i have used it muitiple times with most of the bases besides the offset base. The angle base is quit handy for flush triming angles and does a real nice job once set up which is very easy. The plunge base is awesome it has very nice depth stops that can each be ajusted to different hights. Just like the large routers . The only thing i dont like is the way the lock lever works on the plunge base u have to hold the locking lever down with you finger once u plunge cut or it seems to poop back up which cause the plunge base to move up and down. It is not a big deal i was able to use slight presure to hold the lever down with my finger while holding the handles and was still able to control the router easily. Im sure this was designed this way so it is easier to unlock to raise the router out of the hole . The case the kit comes with is really nice it has muiltiple pockets and compartment for storage. Ther is enough room to put a secound router in it. This is a small router with big router options. I am very happy with this purchase. And it arrived in perfect condition and a few days early with a large snow storm between the time of order and arrival. I will use amazon for future power tool purchases

We haven’t used this one yet, however, bought this because my brother has the same one and it’s great! This was a gift for my hubby! It is easy to use. Made well. Works well. We cut out and entire Christmas scene silhouette with my brothers. I used it myself , my hubby taught me first. I found it easy to use hold. Easy to use. Just have to take safety precautions. I like that it’s corded for power. Didn’t weigh too much. My hands were buzzing for a while after I was done.

I bought this compact router from Makita thinking I’d do some light edge profiling. LIGHT. What actually happened is I blacked out for three hours and woke up surrounded by perfectly radiused scrap wood. This router is 1-1/4 HP of chaotic woodworking energy. You pick it up like, oh cool, small router. You turn it on and it’s like: “HELLO. I AM HERE TO MAKE YOU OVERCONFIDENT.” Flush trimming? Done before you finish blinking. Decorative cuts? Cleaner than a hospital hallway. Small joinery? It volunteers. Tight spaces? It squeezes in like it owes somebody money. This thing doesn’t cut wood — it humiliates it. Ergonomics? Fantastic. Balance? Chef’s kiss. Vibration? Basically nonexistent. It feels like the router equivalent of a samurai sword. Just smooth, controlled violence. Now let’s talk about the real issue: I cannot be trusted with this tool. I routed: • Scrap wood • Already routed boards • A piece of wood I was holding just to feel something • Something that absolutely did NOT need routing My shop now looks like a showroom called “Edges: The Reckoning.” This router gives you danger confidence. You start saying things like: “Yeah, I’ll freehand that.” “Sure, let’s add a profile.” “Why not build a bench?” “I should probably start a woodworking YouTube channel.” Next thing you know it’s 11pm, you’re covered in sawdust, your coffee table has decorative bevels, and your spouse is asking why the cutting board has racing stripes. Also — this router ruined other routers for me. I pick up my old one now and I’m like: Look at this weak little thing. Disgusting. Downsides? • Makes you irresponsible • Encourages unnecessary projects • Causes spontaneous chamfers • Will absolutely convince you that you’re better at woodworking than you actually are Final verdict: Small router. Huge attitude. Zero mercy. 10/10. Would buy again. Would defend in court. Would let babysit my projects.

Value for money

アメリカ仕様かプラグのマイナス側先端が広くなってコンセントに入らないので通常の日本のプラグと同じように削除加工をして使用。

Excelente herramienta, el tiempo de entrega excelente, bien empaquetado, todo en orden, en cuestión al desempeño de la herramienta funciona de maravilla, muy preciso el ajuste de la base de inmersión, se siente muy estable al trabajar, vale cada centavo, la use para ranurar ACP y funciono perfecto.

Muy buen producto, llegó en excelente condiciones